Your shopping cart is empty!
CLOSE
EcoStar E-Series Inverter is now available in four exclusive models: E-840i (300Watts), E-1040i (600Watts),E-1240i/E-720i (720Watts) & E-1440i (1440Watts). A reliable solution to load shedding problem, E – Series Inverter features modern sine waves offering full battery polarity protection and enhanced battery charging.
Load calculation based on:
EcoStar NL9 Series is a UPS designed with high intensive technology that provides wide input voltage range and is very high efficient. NL9 Series acts as a reliable and high quality perfect partner during electricity failure and offers energy solutions from 1kva to 10kva.
1800 W
Single Phase 2 Wires and Ground
110VAC – 290VAC 110-160VAC on 30% load, 160-200VAC on 80% load 200-290VAC on 100% load
45Hz-55Hz(Auto Detect)
>0.99
<7%(100% nonlinear load)
Max.voltage: +15%(optional +5%, +10%, +25%) Min. voltage: -45% (optional -20%, -30%) Frequency protection range: ±10%
Max.voltage: +15%(optional +5%, +10%, +25%) Min. voltage: -45% (optional -20%, -30%) Frequency protection range: ±10%
Support
±2%
Pure sine wave
0.9
Single Phase & Ground
200/208/220/230/240VAC
50Hz or 60Hz (Synchronized to Mains)
50Hz/60Hz ±0.02Hz
3:1
<3% with linear load <5% with non linear load
72VDC
Full load.3-5 min(Standard) Estimated remaining time displayed on the LCD
12V/7AH
0°C~40°C
<1500m
-25°C~55°C
0~95% non condensing
<50dB(at 1 meter)
Load less then 100% – 150% : 30Seconds, greater then 150% : 300mS then shut
Supports Windows family, Linux, FreeDSB etc.
SNMP card, Dry Contact card
Built in Power Surge, Lightning Device
Up to 90%
>94%
440×86.5×620
22
IEC320 C20-16A
IEC320 C13-10Ax8
Anderson like PowerPole Modular connectors
CE,CB
Load Less Then 100% – 150% : 30Seconds, Greater Then 150% : 300mS then shut
EcoStar ESM Series is a unique inverter of its kind that provides a complete and permanent solution to power outage. Based on pure sine waves ESM Series is very energy efficient and generates maximum power output. The Series offers smart solutions from 600VA (480 W) to 1500VA (1200 W).
Load calculation based on:
640 W
Inverter Mode : 120-300VAC/Smart Mode: 145-285VAC
220VAC
50Hz
Single Phase
38~70Hz
Inverter Mode : 160-260V / Smart Mode : 190-260V
220VAC ± 10%
Inverter Mode : 160-260V / Smart Mode : 190-260V
? 6ms
50HZ±1HZ
Tracking Utility
Sine Wave
0.8
? 55db (1m)
12VDC
13.8V±0.3V
10A/20A
0°C ~ 40°C
13.4/14.7
272 x 285 x 165
380 x 375 x 255
Overload/Short circuit /Overheat
20% ? 95%?Non?Condensing
Load calculation based on:
900 W
170-280 Vac for Narrow range mode and 90-280 Vac for Wide range mode
60/50Hz (Auto Sensing)
230 Vac ±10%
20 ms typical
Simulated Sine Wave
12V
10A/20A
Overload, Overcharge & Short Circuit Protection
Beep every second
Beep every 0.5 seconds
Continuous Beep with Fault Code
5%-90% RH @ 0-50°C (non-condensing)
EcoStar E-Series Inverter is now available in four exclusive models: E-840i (300Watts), E-1040i (600Watts),E-1240i/E-720i (720Watts) & E-1440i (1440Watts). A reliable solution to load shedding problem, E – Series Inverter features modern sine waves offering full battery polarity protection and enhanced battery charging.
Load calculation based on:
300 W
230Vac
170-280 Vac for Narrow Range Mode 90-280 Vac for Wide Range Mode
50/60Hz (Auto Sensing)
±10%
50Hz ± 1Hz
<20ms
Simulated Sine Wave
12V
10A
Overload, Overcharge & Deep Discharge Protection
Beep every 2 seconds
Beep every 0.5 seconds
Continuous Beep
0-90% RH @ 0-40°C (Non-Condensing)
Less then 40dB
